Two Cowl Neck Top Designs
Cowl Neck Top – Type A, a bias draped cowl at the front.
I decided to use a contoured top with cap sleeves, so I picked these options. The semi-fitted Top Style is the least fitted of the contoured options.
Top Group: Contoured Top Style: Semi-Fitted Shoulder: Sloped Neck Group: Boat Neck Style: Modified Darts: None Sleeve Group: Cap Cap Style: Angled
As I consider the waist and hip still a little too fitted, I selected those segments and moved them to a more pleasing position. I also made the cap not so wide, and the armhole shallower. I also raised the shoulder point slightly.
To make the cowl, I selected the centre front neck point and dragged it outwards to make the neckline longer. (Not forgetting to turn off F/B symmetry before doing this.) I also used the curve control points on the neck to straighten it out. Then I selected the centre hem point and dragged it slightly out, and downwards to increase the centre front length. I used the hem curve control points to make the hemline a better shape.
To complete the pattern piece, I created a facing for the neckline. When printing the pattern, print the pages with the facing a second time and cut it out separately, then flip it over and attach it to the neck edge so it forms an extension to the pattern piece. It will make a V shape at the shoulder. You may want to cut this out so it is wider at the centre front rather than parallel to the neckline for its whole length, as the inside of the neckline may show when worn.
When you cut out the fabric, the centre front should be cut so it is on the bias, NOT the straight grain, or the cowl will not drape correctly. (Unless of course you are using a knit fabric)
(Unfortunately, this pattern adaptation only works for sewing. I think you should be able to knit something with the front in one piece, but as the centre front is not at 45 degrees to the vertical, it is not possible to generate shaping instructions for this pattern piece with the centre front as a vertical line. There may be a way of doing this by moving the points for the shoulder and side seam instead, but I have not worked this out. )
It is the dragging of the neck point out and down, then cutting it on the bias, that creates the cowl, so here is a picture of an alternative cowl neck garment to give you the idea.
Cowl Neck Top – Type B, an exaggerated roll collar.
For this, I am going to look at the neckline only. For this reason I am not displaying the sleeve, but of course you will want to include it if you are creating a sleeved garment.
I selected a round neckline, and opted for the Wide Deep style. From the Extras menu I selected to have collars Joined At Back. This activates the Collar Group selection boxes. I changed the Collar Group to Full Roll.
The bottom edge of this collar will fit the neckline. I want a much deeper collar, so I selected the neck edge and moved it downwards until I got the collar depth I wanted. (You should display dimensions to help with this, but I have left them off to make the pictures easier to see.)
To make the outer edge looser, drag the outer points outwards.
For sewing, I would cut this double with the outer edge along a bias fold. Although the Full Roll collar is not available in a ‘joined at the front version, I would use a back seam for the collar. Do not make the outer edge too large or the collar will look strange.
For knitting, I wouldn’t use the shaping instructions as generated, as this will produce a strange neckline shape. Instead, I would look at the number of stitches to be increased from the neck to the outer edge, and the number of rows deep. I’d then decide how many increase points around the circumference of the neck, and divide the number of stitches to be increased by this, to determine how many increase rows I would need. For example, if I need to increase 36 stitches, and I decide to have 6 increase points, I would need to increase 6 stitches evenly around the row 6 times. With 30 rows, my increases would need to be every 5 rows (probably starting on row 2 or 3 then every 5th row 5 more times, then straight to row 30.
Cowl Neck Top – Type A, a bias draped cowl at the front.
I decided to use a contoured top with cap sleeves, so I picked these options. The semi-fitted Top Style is the least fitted of the contoured options.
Top Group: Contoured Top Style: Semi-Fitted Shoulder: Sloped Neck Group: Boat Neck Style: Modified Darts: None Sleeve Group: Cap Cap Style: Angled
As I consider the waist and hip still a little too fitted, I selected those segments and moved them to a more pleasing position. I also made the cap not so wide, and the armhole shallower. I also raised the shoulder point slightly.
To make the cowl, I selected the centre front neck point and dragged it outwards to make the neckline longer. (Not forgetting to turn off F/B symmetry before doing this.) I also used the curve control points on the neck to straighten it out. Then I selected the centre hem point and dragged it slightly out, and downwards to increase the centre front length. I used the hem curve control points to make the hemline a better shape.
To complete the pattern piece, I created a facing for the neckline. When printing the pattern, print the pages with the facing a second time and cut it out separately, then flip it over and attach it to the neck edge so it forms an extension to the pattern piece. It will make a V shape at the shoulder. You may want to cut this out so it is wider at the centre front rather than parallel to the neckline for its whole length, as the inside of the neckline may show when worn.
When you cut out the fabric, the centre front should be cut so it is on the bias, NOT the straight grain, or the cowl will not drape correctly. (Unless of course you are using a knit fabric)
(Unfortunately, this pattern adaptation only works for sewing. I think you should be able to knit something with the front in one piece, but as the centre front is not at 45 degrees to the vertical, it is not possible to generate shaping instructions for this pattern piece with the centre front as a vertical line. There may be a way of doing this by moving the points for the shoulder and side seam instead, but I have not worked this out. )
It is the dragging of the neck point out and down, then cutting it on the bias, that creates the cowl, so here is a picture of an alternative cowl neck garment to give you the idea.
Cowl Neck Top – Type B, an exaggerated roll collar.
For this, I am going to look at the neckline only. For this reason I am not displaying the sleeve, but of course you will want to include it if you are creating a sleeved garment.
I selected a round neckline, and opted for the Wide Deep style. From the Extras menu I selected to have collars Joined At Back. This activates the Collar Group selection boxes. I changed the Collar Group to Full Roll.
The bottom edge of this collar will fit the neckline. I want a much deeper collar, so I selected the neck edge and moved it downwards until I got the collar depth I wanted. (You should display dimensions to help with this, but I have left them off to make the pictures easier to see.)
To make the outer edge looser, drag the outer points outwards.
For sewing, I would cut this double with the outer edge along a bias fold. Although the Full Roll collar is not available in a ‘joined at the front version, I would use a back seam for the collar. Do not make the outer edge too large or the collar will look strange.
For knitting, I wouldn’t use the shaping instructions as generated, as this will produce a strange neckline shape. Instead, I would look at the number of stitches to be increased from the neck to the outer edge, and the number of rows deep. I’d then decide how many increase points around the circumference of the neck, and divide the number of stitches to be increased by this, to determine how many increase rows I would need. For example, if I need to increase 36 stitches, and I decide to have 6 increase points, I would need to increase 6 stitches evenly around the row 6 times. With 30 rows, my increases would need to be every 5 rows (probably starting on row 2 or 3 then every 5th row 5 more times, then straight to row 30.
~Gabrielle Stanley
Cochenille Design Studio UK Educator/Dealer
I just got my Garment Designer 2.52 and it's so fun. Thank you so much for this blog. It's really helpful to read your illustrated posts.
ReplyDelete